不锈钢软管泵的保养：不锈钢泵紧固端面螺栓时，不锈钢泵用力要对称均匀；边紧边盘动转子。若遇到卡涩，不锈钢泵应松掉螺栓重新紧。电泵泵驱动轴不能承受任何径向垂直力，皮带、链条、齿轮等侧向驱动方式禁止使用。底板强的驱动轴与电机轴的连接采用弹性联轴器或链式联轴器。软管泵的齿轮油度要够，不要时间长了泵的底板一软，造成电机与泵不对中而损坏泵。弄清楚泵的允许高转速和现场工作高转速。务必让流体进到入口，尽量不要干转和空转。                 

软管泵工作原理：
一根内壁光滑，强度可靠的特制橡胶软管安装在泵体内部，通过一对压辊沿着软管旋转挤压，这样的 旋转使得介质往一个方向输送而不会倒流，软管在输送介质之后，由被压扁软管的自身弹性和侧导轮的强制下，软管恢复原状，此时，软管内产生高真空将介质再次吸入管腔，然后介质在随之而来的压辊挤压下从软管内排出，如此周而复始，介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.